MICiTECH Class B Autoclave with Printer

Manufacturer: MICiTECH

Delivery Time:

  • Within 25-30 working days after order placement inside Kathmandu valley
  • Within 30-35 working days after order placement outside Kathmandu valley

Delivery Charges:

  • None inside Kathmandu valley
  • As per courier charges outside Kathmandu valley

 190,000.00 240,000.00




-Micro-computer control, imported Motorola sensor, high accuration and precision.

-During the sterilizing procedure, the range of temperature is ±0.5.

-Automatic cleaning program in the steamer, avoid the occlution.

-Display the sterilizing procedure date and curve.

-Water quality monitoring,indicate the water tank condition, automatic notice when used water tank is full.

-Safety valve, double lock, mechanical lock, air lock, multi pressure safe protection device.

-Printer is optional, record the sterilizing procedure with USB.

-Applied with stomatology, orthopedics, ophthalmology, beauty industries and other area.


Class B Autoclave 
Voltage: 220V/50HZ 

Power Consumption:2200W
CSE Korea imported Vacuum Pump
ULKA Italy imported water pump
Total Time: 58min
Gross Weight: 53kg 

Sterilization chamber dimensions: 250 x 450mm 

Working time : less than 75minutes (normally 45 to 55minutes )


Key Specifications

Equipment Steam sterilizer
Classification  Class B
Model ST-16LED,ST-18LED,ST-23LED
Manufacturer Foshan MIC Medical Technology Co.,Ltd
Power supply 220V±10%
Frequency 50Hz±1 Hz
Mains fuses F 15A 250V
External dimensions (LxDxH) 610 x 460 x 420 mm          (rear connections excluded)
Nominal power W   (13 A)
Insulation class Class II
Utilization Internal use
Acoustic noise level 50 db(A) max

Environmental operating conditions

Temperature:                     5~40°C

Relative Humidity:            max 80%, non condensing

Height:                                max 3000 m (a.s.l.)

Net weight 16L approx. 41 KG                

18L approx. 46 KG               

23L approx. 54 KG       

Sterilization chamber dimensions

(Lmax x Hmax)

16L: 230 x 360 mm

18L: 250 x 380 mm

23L: 250 x 450 mm

Capacity of the distilled water reservoir


approx. 5L   ( water at level MAX )
Sterilization programmes Available:    

Preset:          ( directly selected by the operator )

Test programmes  Helix / BD Test Vacuum Test
Pre-heating time (from cold) approx. 20 mins    



  • 1 complete unit of Autoclave with internal sterlization basket
  • 1 x Adapter
  • Necessary tubings


  • Manufacturer/ Importer (NDI Pvt. Ltd.) warranty is applicable if mentioned above for this product.
  • Service and warranty are handled by the manufacturer/ importer (NDI Pvt. Ltd.) directly for this product if mentioned above.
  • Manufacturer/ Importer (NDI Pvt. Ltd.) will be liable to replace the products within the warranty period.
  • Buyer acknowledges that the products purchased/used are a subject matter of original Manufacturer/ Importer’s warranties. 
  • Any or all claims in relation to returns and replacement shall be made to the Manufacturer/ Importer (NDI Pvt. Ltd.).
  • The buyer acknowledges that the products once sold will not be exchanged or taken back unless the seal of the package of the products is intact or not altered in any manner of is not tampered as the case may be.

Additional information


16 L, 18 L, 23 L


There are no reviews yet.

Be the first to review “MICiTECH Class B Autoclave with Printer”

Your email address will not be published. Required fields are marked *