Safe-Med Glass Bead Sterilizer

Manufacturer: Safe-med

Delivery Time:

  • Within 2-3 working days inside Kathmandu valley
  • Within 3-5 working days outside Kathmandu valley

Delivery Charges:

  • None inside Kathmandu valley
  • As per courier charges outside Kathmandu valley




  • Glass Bead Sterilizer
  • Quantity of Glass Beads 300G/Pc
  • Sterlization Time: 15-25 sec


  • Place unit on easily accessible side table with smooth surface to avoid wobbling.
  • Fill aluminum crucible with enclosed Glass bead up to 5mm from the rim.
  • Turn ON light switch. Unit ready to use in approximately 10 minutes as indicated by
  • READY GREEN LIGHT however, we prefer that unit be used after 30 minutes after
  • initial time giving unit the to stabilize to require temperature.
  • Insert working ends of instrument to be sterilized into Glass Bead crucibles ( see Time Chart Below) if desired instruments may be rinsed under running water and wiped dry before use in Glass Bead Sterilizer.
  • Leave Sterilizer ON all day if desired as the unit will maintain constant sterilization temperature.
  • NOTE: Instrument can be sterilized even when the Heating Light is ON( after the initial heat up time of minutes)
  • When unit no longer in use switch off and allow to coll for 5 minutes.



– It is recommended that glass beads to be replaced atleast once in 3 months. 
– Clean glass bead atleast once every 2 weeks

– Remove glass beads once the unit is completely cool. 
– Wash the beads with mild soap, rinse and dry thoroughly before reuse. 

Key Specifications

 Dimesnion (mm)  200 x 151 x 136
 Well Size (mm)  59 x 58
 Wattage  250W
 Temperature Controller      

  Micro Controller   based         PID controller

 Temperature Range    220 – 240 V :: 50 Hz 
 Weight incl Glass   Beads    2.1 Kg
 Input Power    Latex Free


1 Unit Glass Bead Machine And 300gms Of Glass Beads


  • Manufacturer/ Importer (NDI Pvt. Ltd.) warranty is applicable if mentioned above for this product.
  • Service and warranty are handled by the manufacturer/ importer (NDI Pvt. Ltd.) directly for this product if mentioned above.
  • Manufacturer/ Importer (NDI Pvt. Ltd.) will be liable to replace the products within the warranty period.
  • Buyer acknowledges that the products purchased/used are a subject matter of original Manufacturer/ Importer’s warranties. 
  • Any or all claims in relation to returns and replacement shall be made to the Manufacturer/ Importer (NDI Pvt. Ltd.).
  • The buyer acknowledges that the products once sold will not be exchanged or taken back unless the seal of the package of the products is intact or not altered in any manner of is not tampered as the case may be.


There are no reviews yet.

Be the first to review “Safe-Med Glass Bead Sterilizer”

Your email address will not be published. Required fields are marked *